Metal Bellow Seals
Metal Bellow Seals

METAL BELLOW MECHANICAL SEALS

Type RT-M14/RT-M15

  • Single Acting.
  • Dual directional.
  • Inside mounted.
  • Inherently Balanced Mechanical Seal.
  • Independent of direction of rotation.

Description

The Type RT-M14/RT-M15 is Metal Bellow Mechanical Seals with extremely durable in applications where temperature and media (fluid) result in an aggressive environment. Rotating bellows design acts to clear convolutions and prevent accumulation of debris. These bellow seals are constructed by welding a series of diaphragms together at the edges to form a bellows unit of Alloy C-276 providing high strength and excellent corrosion resistance. Recommended for high temperature mediums e.g. hot oils, pitch, tar and other hydrocarbons, fuels. Pumping ring incorporates better circulation of barrier fluid and coolers.

We also manufacture and supply Single Spring Mechanical Seals, Multi Spring Mechanical Seals, Teflon Bellow Seals, Elastomer Bellow Mechanical Seals, and Reverse Balance Mechanical Seals as being top most mechanical seal manufacturers in Mumbai as well as known as one of the most precise mechanical seal manufacturing companies in India.

FAQ

  • It is designed to seal rotating shafts in pumps and process equipment.
  • The metal bellow provides flexibility while maintaining reliable sealing.
  • Commonly used in high-temperature, high-pressure and demanding industrial applications.
  • When the application involves high temperature or aggressive operating conditions.
  • It is useful where conventional elastomer seals may not be suitable.
  • The correct design depends on the fluid, temperature, pressure and RPM.
  • Check shaft diameter, pressure, temperature and rotational speed.
  • Specify the process fluid and its chemical characteristics.
  • Seal-face materials, mounting dimensions and equipment specifications are also important.
  • Clean and inspect the shaft and seal chamber before installation.
  • Install the seal according to the specified shaft dimensions and setting length.
  • Keep the sealing faces clean and ensure proper shaft alignment.
  • Check for leakage before starting normal operation.
  • Yes, replacement seals can be supplied according to your existing seal or equipment.
  • Share the brand, model number, shaft size, dimensions, photo or drawing.
  • The replacement can be matched according to fluid, pressure, temperature and RPM.

Shaft Dia. : 25mm to 100mm

Pressure : Up to 25 bar

Temperature : -30°C to 260°C

Speed: 3000 RPM

Seal Ring Faces : Carbon, SiC and TC.

Seat Faces : Carbon, TC and SiC.

Elastomer : Viton, PTFE, FEP, EPDM and FFKM

End fitting MOC : SS 316, Hast- C and Carpenter 42

Bellow MOC : HAST – C, AM350 and Inconel