Single Cartridge Mechanical Seals
Single Cartridge Mechanical Seals

BALANCED CARTRIDGE MECHANICAL SEALS

Type RT-S60

  • Single and Double Mechanical seal,
  • Cartridge preassembled unit
  • Inside Mounted
  • Balance Mechanical face
  • Easy Installation, Field repairable
  • Interchangeable mating rings & seal ring

Description

The Type RT-S64 is Balance Cartridge Mechanical having preassembled cartridge integral sleeve and gland plate. Balance Cartridge Mechanical seal is hydraulically balanced seal-face technology for reduced power consumption and heat generation enhancing seal life. It’s a non-contact type design where spring is prevented from clogging and corrosion. Multiple spring with rotating style and wave spring with demand by customer. Pressurized buffer fluid can be applied.

We also manufacture and supply Single Cartridge Mechanical Seals, Double Cartridge Mechanical Seals and High Pressure & Speed Balance as being top most mechanical seal manufacturers in Mumbai as well as known as one of the most precise mechanical seal manufacturing companies in India.

FAQ

  • It is used to seal rotating shafts in pumps and industrial equipment.
  • The balanced design reduces hydraulic load on the seal faces.
  • It is suitable for applications requiring reliable sealing under higher pressure and speed.
  • Check shaft diameter, pressure, RPM and temperature.
  • Confirm the process fluid and its chemical properties.
  • Seal chamber dimensions and existing seal specifications are also important.
  • It provides better suitability for higher-pressure applications.
  • Reduced hydraulic loading can help improve seal-face performance.
  • The pre-assembled cartridge design also simplifies installation and maintenance.
  • Clean and inspect the shaft and seal chamber.
  • Install the pre-assembled cartridge using the specified setting dimensions.
  • Ensure correct shaft alignment and tighten components evenly.
  • Check for leakage before starting normal operation.
  • Yes, replacement seals can be selected for existing pumps or equipment.
  • Share the brand, model, shaft size, seal dimensions, photo or drawing.
  • The replacement can be matched according to pressure, RPM, temperature and process fluid.

Shaft Dia. : 10mm to 100mm

Pressure : Up to 35 bar

Temperature : -30°C to 260°C

Speed : 3000 RPM

Seal Ring Faces  : Carbon, TC and SiC

Seat Faces           : Carbon, SiC and TC

Elastomer            : Viton, PTFE, and FFKM

MOC                     : SS 316, HAST-C Alloy – 20